Cost-effective programmable logic controller alternatives optimized as embedded components in OEM products
Home
Embedded Programmable Controllers for OEMs
World best value OEM programmable controller.

SPLat accessories
Programmable Logic Controller replacement for OEM embedded controls


By Goooogle
News, views and tech tips delivered occasionally to your inbox.
Warehouses in US and Australia
Programmable Logic Controller replacement for OEM embedded controls
We offer a number of accessory products to go with your SPLat controller. Most of these are 3rd party products we offer as a convenience service, and are not supported.
Programmable Logic Controller replacement for OEM embedded controls

PC232

This is the CC16/18/MS12x programming cable, if you need extras. Note that the Developer's Kit includes the cable.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 48g/1.7oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$30 $29 $28
Prices are in US dollars
Programmable Logic Controller replacement for OEM embedded controls
Units supplied may be of different appearance but will always be based on the FTDI chip.

USB232

Not all USB to serial (RS232) adaptors are created equal. If your computer lacks a serial (COM, RS232 port) you will need an adaptor. The adaptor we offer is based on the FTDI chips, which have proven themselves the most dependable. Two of our competitors have come to the same conclusion. In fact, if you call us with problems connecting to your SPLat via a USB adaptor, we are unable to offer support unless you are using an FTDI based adaptor. We carry this adaptor purely as a convenience service, so you can order it with your SPLat Developer's Kit. The pack may not not include drivers for Vista, but they can be downloaded from the FTDI download page. The VCP driver is the correct one.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 100g/3.5oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$45 $45 $45
Prices are in US dollars
This is a third party product which we cannot support
Programmable Logic Controller replacement for OEM embedded controls
Units supplied may be of different appearance.

PSUS24630 - 24VDC 0.6A power supply

A switchmode wall plug style 24VDC power supply. This is indended primarily for use during development work. It is supplied with the output wires unterminated so you can fit the appropriate SPLat power connector from your SPLar Developer's Kit. We carry this purely as a convenience service, so you can order it with your SPLat Developer's Kit.
Note: This is a US style mains unit. It is not available to customers outside North America.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 250g/8.8oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
US/Canada customers only
$25 $25 $25
Prices are in US dollars
This is a third party product which we cannot support
 

DB9MF-6 - RS232 cable

A 6' long DB9 M-F data cable. Use as a SPLat programming cable on your computer's 9-pin COM port or in conjunction with a USB232 adaptor.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 150g/5.3oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$12 $12 $12
Prices are in US dollars
This is a third party product which we cannot support

XP485 - RS485 adaptor for Xwire, universal

This adaptor connects to the Xwire port on any SPLat controller and converts it to an RS485 interface. Xwire protocol over RS485 will allow cable runs of up to 1km (with suitable cable and grounding precautions) and up to 32 devices.
Note: There is also an Xwire adaptor made specifically for the CC16/18, shown on that products's page.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 75g/2.6oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$29 $28 $27
Prices are in US dollars.

MB485 - RS232/RS485 adaptor for controllers with DB9 comms ports

This adaptor plugs directly into the DB9 communications port on a SPLat controller and converts it to an RS485 interface. Typically you would use this to extend the range of ModBus communications up to 1km (with suitable cable and grounding precautions). Compatible with MMi202 and SL100.
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 75g/2.6oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$35 $34 $33
Prices are in US dollars.

PC485 - RS232/RS485 adaptor for PC COM port

This adaptor plugs directly into the COM port on a PC and converts it to an RS485 interface. It features automatic Tx/Rx switching. Documentation
   1-4         5-9         10-24     

Aus/NZ customers:
 Click HERE
Don't use the button

Shipping weight 150g/5.3oz
Prices are US dollars & apply
only to online factory direct
sales outside Australia/NZ
Shipping information
$59 $57 $55
Prices are in US dollars.
 

ULNX6 - Spare output chips

A pack of 6 ULN2803A digital output chips, in case you have an accident!
$18 Shipping weight 25g/0.9oz
Prices are US dollars & apply only to online factory direct sales outside Australia/NZ
Shipping information
Copyright ©1996-2007 SPLat Controls Pty Ltd. All rights reserved. SPLat and the SPLat logo are a registered trademark of Microconsultants Pty Ltd.
Our other sites: plc-plc.com control-systems.biz embedded-systems.biz gaugelink.com programmable-logic-controllers.com splatco.com splatco.com.au embeddedplc.com agidrive.com
Cost-effective programmable logic controller alternatives optimized as embedded components in OEM products